|
The Nexus anti vibration mounting kit
is an easy to use all-in-one mounting kit to minimize vibration noise
from CPU fans, case fans and hard disk drives. including 4 soft rubber
feet for your case.
Rubber Fan
Mounts: 12 Units rubber fan mounts for open
chassis fan & 12 units rubber fan mounts for open and closed chassis
fan.
- Prevents resonance, absorbs
vibrations that other wise would be transmitted from the fan
into the computer case.
- 12 units to be used on open
chassis fans
- 12 units to be used on open or
closed chassis fans
- 4 units to be used per fan, so
sufficient rubber fan mounts for 3 fans
Rubber Grommets and
Screws: 12 units rubber grommets with
screws for hard disk drive mounting
- Helps to reduce transmitted
vibration noise from the hard disk drive, by isolating the
mounted hard disk drive from the chassis
- Suitable for both 3.5" and
2.5" hard disk drives
- 4 units to be used per hard
disk drive, so sufficient grommets and screws for 3 hard disk
drives.
Rubber Feet: 4 units rubber feet with adhesive
- Superb soft rubber feet to
replace and hard plastic version
- Prevents the transition of
unwanted vibrations from the inside of a pc via the chassis into
the desk or hard floor.
- With pre-applied adhesive tape
- Can also be used on printers,
speakers etc.
20 Tie Raps: 20 units tie raps
- Clear plastic tie raps
- To tie up lose cables to
prevent them from hitting fan blades and to prevent annoying
noises caused by loose cables touching the case chassis
- 9cm/3.54inch length
|
