|
|
|
  |
|
 |
|
|
The Nexus DiskTwin is an ideal solution to
get rid of any hard disk drive vibration noise and resonance. Are you
tired of all the hard disk seek and vibration noises? Or is your hard disk
creating resonance in your case? The Nexus DiskTwin will alleviate your
suffering!
The DiskTwin is made of two pieces of solid aluminum to
augment the cooling capacity of your hard disk, plus each piece is equipped with two high quality solid rubber absorber blocks. Just remove
the hard disk from your computer and mount the DiskTwin on both sides of
your 3.5" hard disk. Then re-mount the complete unit in a free 5.25" drive
bay and your done! No more agony!
-
Medical application
-
The Nexus DiskTwin is also suitable for
medical equipment that requires mounting of a hard disk drive
without earthen. The DiskTwin allows you to mount the hard disk
drive without any direct contact with the chassis.
The DiskTwin will stop any HDD vibration
noise and resonance and will maximize hard disk cooling.
|
|
|
|
|
|
|
|
 |
Reduces hard disk vibration noise and
resonance. High quality rubber shock and vibration absorption
blocks |
|
|
|
|
|
|
|
|
 |
Solid aluminum heat sink with thermal pads for
more efficient cooling. |
|
|
|
|
|
|
|
 |
The 3.5" hard disk equipped
with the Nexus DiskTwin fits into any 5.25" drive bay |
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
Specifications: |
|
|
|
|
- Model number:
DTW-2300A/B |
|
|
|
|
- Dimensions:
146.81x26.15x18.8 mm |
|
|
|
|
- Compatability: 3.5"
HDD |
|
|
|
|
- Weight:
105 grams (per unit) |
|
|
|
|
- Materials:
Solid Aluminium |
|
|
|
|
Solid Rubber |
|
|
|
|
Thermal Pad |
|
|
|
|
Mounting Screws
|
|
|
|
|
- Warranty:
3 Years |
|
|
|
|
|
|
|
|
|
|
Drawing: |
 |
|
|
|
|
|
|
|
|
|
|
Installation instruction:
1)
Clean the two surfaces of the hard disk to which the DiskTwin is to be
mounted, removing any dust and oil.
2)
Mount the DiskTwin onto the hard disk sides by using the supplied (14mm)
screws. Push the screws through the rubber block into the mounting
holes of the hard disk and tighten the screws
3) Mount
the hard disk with DiskTwin into a 5.25” drive bay in your system using
the supplied (7,5mm) screws
4) (Re-)fix
the connectors to your hard disk |
|
|
|
|
|
| High resolution
image: |
- Nexus®
DiskTwin
Name: disktwinwithdisk_large.gif
Format: GIF
Size: 730(w)x368(h) - 109 kB
- Nexus®
DiskTwin
- Name: disktwin1_large.gif
- Format: GIF
- Size: 668(w)x340(h) - 83 kB
|
|
|
|
|
|
|
|
|
|
|
Reviews and customer feedback |
|
|
|
|
|
|
|
| |
|
|
Send us your feedback...mail to:
info@nexustek.nl |
|
|
|
|
|
|
