|
With the Nexus H2OTEK water cooling solution you will bring the best out
of your water cooled system. The H2O-2000 CPU water block has an
extreme high flow rate because of its sophisticated base structure
design. With its transparent acryl top cover your will be able to see
the water rushing through the block.
The H2O-2000 can be mounted independently on
an AMD XP processor and when using the specific mounting plates you
will be able to mount it either on an AMD 64 or Intel Pentium 4
processor.
The base plate of the H2O-2000 has a 100%
flat surface area. We have decided not polish the base plate to a
mirror finish because the polishing process will influence the flatness of
the surface. 100% flat means the best possible contact between the CPU and
the base plate. This results in the best possible thermal conductivity and
best possible performance.
And because if you are pushing to get the most out of your system using
water cooling, we think you will be very picky on the thermal interface
material you will be using. So therefore we have not supplied any...
Please use what you think is the best possible thermal material to squeeze
the performance just a few degrees more! Enjoy! |
|
|
Package contents: |
-
Water block with fittings and nuts, 1pc
-
Adapters for AMD 64, 2 pcs
-
Adapters
for Pentium 4, 2 pcs
-
Bolts M3 short ones, 8 pcs
-
Bolts M3 long ones, 4 pcs
-
Isolating washers, 8 pcs
-
Pressure springs, 4 pcs
-
Bushings, 4 pcs
-
“Y”-connector, 1 pc
|
-
|
| Specifications: |
-
Copper base plate
-
Transparent acryl top cover
-
Suitable for:
-
Intel Pentium 4
-
AMD XP
-
AMD 64
-
1 inlet, 2 outlets
-
Rapid fittings
-
Suitable for 8/10mm tubes
-
Extreme High flow rate base
structure design
-
100% flat baseplate
-
Total hight: 4,7cm
-
Length: 8,1 cm
-
Width: 5,4cm
-
Thermal paste is not supplied
|
|
|
|
|
|
H2O-2000 in detail:
The H2O-2000 consists of a copper base with a transparent acryl top. The
rapid fittings are suitable for 8/10mm tubes. The robust and solid
quality of the product will enable you to push your water cooled system
to the max. Getting the best possible performance out of your system. |
|
|
H2O-2000 mounted with metal frames to fit onto a P4
socket 478 socket processor. |
 |
|
|
The copper base and the transparent acryl cover are
securely joined together. Do not try to dissemble the two layers, this
will void your warranty and may cause serious damage. |
 |
|
|
The Nexus H2O-2000 has one center inlet and two outlets
with a sophisticated base structure design for an extreme high flow
rate. |
 |
|
Base plate:
The base plate of the H2O-2000 has a 100%
flat surface area. We have decided not polish the base plate to a mirror
finish because the polishing process will influence the flatness of the
surface. 100% flat means the best possible contact between the CPU and
the base plate. This results in the best possible thermal conductivity
and best possible performance. |
|
|
100% flat surface will guarantee the best
possible contact between the CPU and the base plate. |
 |
|
|
The sophisticated base structure design ensures you an
extreme high flow rate. |
 |
|
Close-up of the die center of the base plate design
structure. |
 |
|
Intel Pentium 4:
The H2O-2000 can be mounted on a socket 478 Intel Pentium 4 processor
using the two supplied metal frames. The metal frames nicely fit between
the copper base and the transparent acryl top and are fastened with the
supplied screws. |
|
|
H2O-2000 mounted with metal frame to fit onto a P4
socket 478 socket processor. |
|
|
|
Metal mounting brackets fits perfectly with the copper
base for optimal stability. |
 |
|
Just mount the metal brackets on the cooling block with
the 4 supplied screws. |
 |
|
H20-2000 ready to be mounted on P4 processor. |
 |
|
AMD 64:
The H2O-2000 can be mounted on a socket 754 AMD 64 processor using the
two supplied metal frames. The metal frames nicely fit between the
copper base and the transparent acryl top and are fastened with the
supplied screws. |
|
|
H2O-2000 mounted with metal frame to fit onto an AMD64 socket
754 socket processor. |
|
|
|
Metal mounting brackets fits perfectly with the copper
base for optimal stability. |
|
|
Just mount the metal brackets on the cooling block with
the 4 supplied screws |
|
|
H20-2000 ready to be mounted on AMD64 processor. |
|
|
AMD XP:
The H2O-2000 can be mounted on a socket A AMD XP processor without using
any of the supplied metal frames. |
|
|
H2O-2000 ready to be mounted on AMD XP processor. |
 |
|
|
|
 |
|
|
 |
|
|
|
|
|
|
|
|
- GPU water block suitable for
ATI Radeon (full series), nVidia Geforce chipsets and many more.
-
|
|
|
|
|
|
|
|
|
Important notice: |
|
|
|
 |
This CPU water cooling solution is a
component for water cooling systems and cannot be used independently.
It must be used with a water cooling system. |
|
|
Nexus Technology is not responsible for
any damage that occurs because of wrong installation. |
|
|
The maximum weight for the cooler is
specified as 450g/450g/300g for socket 478/754/462 respectively.
Special care should be taken when moving a computer equipped with a
cooler which exceeds the relevant weight limit. |
|
|
Nexus Technology is not responsible for
any damage that occurs when moving a computer. |
|
|
Performance of the CPU water block is
dependent on your water cooling system components such as pump
capacity and radiator capacity. |
|
|
|
|
Conditions of usage: |
|
|
|
|
Keep the block away from chemically
active substances, reacting with the plastic materials (acids,
solvents, alcohols). It is advised to use distillated water with the
preparations meant for the liquid cooling systems. |
|
|
Avoid touching the copper base of the
block – it may cause stains. |
|
|
Do not touch the grinded surface of the
block because the sediment worsens the warmth transfer capacity. |
|
|
Do not remove the screws fixing the
bottom and the top of the water cooling block. |
|
|
Turn the computer off immediately after
observing leakage. |
|
|
Obey the instruction when installing or
dismantling. |
| |
|
|
