|
With the Nexus H2OTEK water cooling solution you will bring the best out
of your water cooled system. The H2O-6000 GPU water block has an
extreme high flow rate for optimal cooling performance. With its transparent acryl top cover your will be able to see
the water rushing through the block.
The H2O-6000 can be mounted on most nVidia
and ATI chipsets and many more graphic chip sets because of the flexible
mounting solutions.
The base plate of the H2O-6000 has a 100%
flat surface area. We have decided not polish the base plate to a
mirror finish because the polishing process will influence the flatness of
the surface. 100% flat means the best possible contact between the GPU and
the base plate. This results in the best possible thermal conductivity and
best possible performance.
And because if you are pushing to get the most out of your system using
water cooling, we think you will be very picky on the thermal interface
material you will be using. So therefore we have not supplied any...
Please use what you think is the best possible thermal material to squeeze
the performance just a few degrees more! Enjoy! |
|
|
Package contents: |
-
H2O-6000 graphic card water cooling block
with fittings and nuts, 1pc
-
Adapters, 2 pcs
-
Bolts M2 short ones, 8 pcs
-
Bolts M2 long ones, 4 pcs
-
Nuts M2, 4 pcs
-
Isolating washers, 12 pcs
-
Pressure springs, 4 pcs
-
Bushing, 4 pcs
|
-
|
| Specifications: |
-
Copper base plate
-
Transparent acryl top cover
-
Suitable for:
-
1 inlet, 1 outlets
-
Rapid fittings
-
Suitable for 8/10mm tubes
-
Extreme High flow rate base
structure design
-
100% flat baseplate
-
Thermal paste is not supplied
|
|
|
|
|
|
H2O-6000 in detail:
The H2O-6000 consists of a copper base with a transparent acryl top. The
rapid fittings are suitable for 8/10mm tubes. The robust and solid
quality of the product will enable you to push your water cooled system
to the max. Getting the best possible performance out of your system. |
|
|
H2O-6000 with rapid fittings suitable for 8/10mm tubes. |
 |
|
|
The copper base and the transparent acryl cover are
securely joined together. Do not try to dissemble the two layers, this
will void your warranty and may cause serious damage. |
 |
|
|
The Nexus H2O-6000 has one inlet and one outlet. The sophisticated base structure design
will enable an extreme high flow
rate. |
 |
|
Mounting options:
The H2O-6000 has many different mounting
possibilities to be able to mount the GPO water block on a wide variety
of graphical chip sets. ATI Radeon and most nVidia GeForce chipsets are
supported, but if you have different chipset, please refer to the
dimensions given below to make sure the H2O-6000 is compatible. |
|
The Nexus H2O-2000 has many different mounting
solutions.
- 55
mm = ATI Radeon
- 55 mm = nVidia
GeForce3
|
 |
|
With the two supplied brackets two more mounting
solutions are available.
- 75.5 mm = GeForce
6800
- 79 mm = GeForce4
|
 |
|
Baseplate:
The base plate of the H2O-6000 has a 100%
flat surface area. We have decided not polish the base plate to a mirror
finish because the polishing process will influence the flatness of the
surface. 100% flat means the best possible contact between the CPU and
the base plate. This results in the best possible thermal conductivity
and best possible performance. |
|
|
100% flat surface will guarantee the best
possible contact between the GPU and the base plate. |
 |
|
|
|
 |
|
|
|
|
|
|
|
|
|
- CPU water block suitable for
AMD XP, AMD 64 and Intel Pentium 4. The H2O-2000 has a very
sophisticated base structure design to ensures an
extreme high flow rate.
-
|
|
|
|
|
|
|
|
|
Important notice: |
|
|
|
 |
This GPU water cooling solution is a
component for water cooling systems and cannot be used independently.
It must be used with a water cooling system. |
|
|
Nexus Technology is not responsible for
any damage that occurs because of wrong installation. |
|
|
Nexus Technology is not responsible for
any damage that occurs when moving a computer. |
|
|
Performance of the CPU water block is
dependent on your water cooling system components such as pump
capacity and radiator capacity. |
|
|
|
|
Conditions of usage: |
|
|
|
|
Keep the block away from chemically
active substances, reacting with the plastic materials (acids,
solvents, alcohols). It is advised to use distillated water with the
preparations meant for the liquid cooling systems. |
|
|
Avoid touching the copper base of the
block – it may cause stains. |
|
|
Do not touch the grinded surface of the
block because the sediment worsens the warmth transfer capacity. |
|
|
Do not remove the screws fixing the
bottom and the top of the water cooling block. |
|
|
Turn the computer off immediately after
observing leakage. |
|
|
Obey the instruction when installing or
dismantling. |
| |
|
|
