The Nexus LXM-8200 is a tremendously
quiet
CPU cooler for the Intel LGA-775 socket CPU's. This tower (side blower)
CPU cooler is equipped with two high performance
copper heat pipes with an diameter of a 8mm. The cooler has a
combination of pure copper aluminum fins for the best
possible dissipation/weight balance. The PWM-controlled fan has 10cm
diameter rotor to provide massive airflow all directed directly at the
heat-pipes. The RPM has been set to a maximum of quiet 1500 RPM speed,
yet with enough CFM and static pressure to give your CPU all the
necessary cooling it requires.
The PWM-controlled fan has a fan speed
range of between 700~1500 RPM with a corresponding noise level of just 17
~ 25.5 dB(A). The high performance characteristics of this cooler
guarantees the lowest possible fan speed (and therefore the quietest
possible operation) for your computer system.
The two U-shaped copper Heat-Pipes with
which the LXM-8200 is equipped have a massive 8mm diameter. This in
contrast with many coolers in the market with only 6mm diameter
heat pipes. This 2mm extra gives the cooler the extra power to cool the
CPU without massive airflow.
The LXM-8200 has a PWM controlled fan with
a speed range of between 700~1500 RPM.
The LXM-8200 has the
traditional LGA775 push-pin mounting.
The cooler size is: 11x7,2 x14cm / 4.3x2.8x5.5inch
(including fan)
The PWM-controlled fan has a rotor
of 10cm diameter. The fan mounting is traditional 92mm from factor.
The 2 copper U-shaped Heat-Pipes
are embedded in a copper base.
Specifications
Cooler Specifications
Dimensions:
11 x 7,2 x 14 cm/4.3 x 2.8 x 5.5 inch (including fan)
Weight:
664gr. (including fan)
Fins:
19 pure copper fins, 40 pure aluminum fins
Heat Pipe:
2 copper heat pipes with a diameter of 8mm/0.3 inch
Base Material:
Copper
Fan Specifications:
Propeller diameter:
10 cm/3.9 inch
Mounting:
92mm case fan standard
Speed:
PWM controlled, Max. 1500RPM ±10%
Noise level:
17dB(A) ~ 25.5dB(A)
Bearing:
EL bearing
Rated voltage:
12V
Rated current:
0.18A
Power consumption:
2.16W
Warranty:
3 years
The combination of
aluminum and copper fins give a great balance between heat
dissipation capabilities and weight.
High fins density for the largest
possible surface area.
The LXM-8200 comes with the
mounting push-pins pre-assembled. So no further assembly is
necessary.
Also included in the box is a high
performance silver thermal paste.
Just put a thin film of the silver
paste on the CPU core and mount the LXM-8200 CPU cooler.
The combination of
aluminum and copper fins give a great balance between heat
dissipation capabilities and weight.
High fins density for the largest
possible surface area.
The fan is mounted with a metal clip
and the metal clip has a silicone rubber coating where it is in
contact with the fins, this is done to prevent any resonance between
the clip and the fins.
