Nexus RX-1K 1000 Watt quiet power supply, with Modular Cable Management and solid single 12V Rail.        
 
 
The Nexus Prominent 9 case is your best choice premium chassis for a silent computer. With its toolless installation features it is a breeze to install your components or change your set-up. And the sleek professional look and materials make the case fit in anywhere. A black mesh front and aluminium edges give the Prominent 9 a distinguished look and great expansion possibilities.

 

We fitted our excellent silent case fans. A 14cm is fitted on the ceiling and a 12cm is fitted as air intake in the front. Some isolating padding where the PSU is placed prevents resonance. And there are ventilation holes (and room for a fan) in the bottom of the case for air-intake and the thick rubber feet keep these elevated from the floor to make a smooth airflow possible and eliminate resonance. Check out all the great features....

 

Noise absorption
The Nexus Prominent cases are fitted with some noise absorption material we really love. It is a premium dense foam/rubber-like material with great characteristics. We fitted a flat layer on the panel behind the motherboard and a nice wave foam layer on the other panel. These materials surely hush your system.
 
                                  
 
 
 
Toolless installation
PCI-cards and optical drives are installed toolless with a convenient fixing system.

 

Removable HDD-trays with vibration absorbers
The hard disks are fitted in removable trays to make installation easy and secure. The hard disk are fixed inside the tray with screws with rubber grommets to absorb noise and vibration.

Some cable guides have been installed to nicely guide your cables for a cleaner look in your system.

 

 

 

PSU-bumpers
We have fixed some nice padding on the areas where normally the PSU would hit the chassis. We have attached some patches on the bottom of the case and a little frame around the PSU opening at the back of the case. These 'bumpers' are made form soft foam/rubber-like materials and absorb and vibration caused by the PSU and prevents this resonance to be transmitted to the chassis.

 

Rubber feet
The Prominent case is fitted with rubber feet.
 
 
 
                                     

       

logo stamped in side panels

toolless PCI locks

rubber feet 2 removable HDD trays
 

Highlights

  • ATX/M-ATX case

  • Noise absorption material on side panels

  • Real silent 14cm and 12cm fan pre-installed

  • Room for 4 additional  fans (14/12/9/8cm)

  • 5.25 bays: 9 exposed

  • 3.5 bays: 1 external from 5.25 bay, 8 internal

  • Front ports: 4xUSB2.0, 1xE-Sata,1xMic, 1x Audio (AC'97 or HD)

  • Expansion slots: 7 slots

  • Size case: 508(D)x207(W)x479.3(H)mm

  •       

               

                                                         

                          

         
     
        Images:
     
     

                                                               

         
       
        Manual:

     

     
     
        Reviews:
     

                                                               

         

    HOME  |  ABOUT & CONTACT  |  CASE FANS  |  COOLERS  |  POWER SUPPLIES  |  ACCESSORIES  |  WHERE TO BUY

    © 2000-2013 Nexus Technology BV. All Rights Reserved. Nexus is a registered trademark in Europe and other countries.