-
-
The Nexus Prominent R case
is a premium chassis for a silent computer. With its toolless installation features it is a breeze to install your components or
change your set-up. The sleek professional look and materials make
the case fit in setting. A black mesh front and top give
the Prominent R a distinguished look. We even have included
a SATA dock, for easy file transfer to one of your internal drives., And the
all black interior....
well.... that is just great looking....
-
-
We installed our excellent
silent case fans. One 120mm fan is fitted on the rear for air outtake and a 120mm is fitted
in the front as air intake. Some isolating padding where the PSU is
placed prevents resonance. There are ventilation holes (and room for
a fan) in the bottom of the case and the thick rubber
feet keep these elevated from the floor to make a smooth airflow
possible and eliminate resonance. Check out all the great features....
-
-
Sata Dock
-
The Nexus Prominent
R case have a SATA dock on top, which can be very
useful for easy file transfer. This way you do not need to
open you case, and can just plug in a SATA drive.
-
-
-
-
-
-
-
Noise absorption
-
The Nexus Prominent
R case is fitted with noise absorption material. It is a
premium rubber-like material with great
characteristics. These
materials surely hush your system.
-
-
-
Toolless
installation
-
Practically all
components can be mounted inside the case without
tools. PCI-lots and
Optical drives are fixed with toolless solutions.
-
HDD-tray with vibration absorbers
-
And especially the
HDD trays are very convenient. You just need to squeeze the tray
to be able to pull out the hard disk or place it back. Plus the
HDD's mounting is fitted with rubber to reduce resonance and
vibration. And with the supplied screws you can also mount any
2.5" or SSD drive.
-
-
-
-
-
-
PSU bumpers
and Velcro strap
-
We have fixed some
nice padding on the areas where normally the PSU would hit the
chassis. We have attached some patches on the bottom and side of the case
and a little frame around the PSU opening at the back of the
case. These 'bumpers' are made of soft foam/rubber-like
materials and absorb vibration caused by the PSU and
prevents this resonance to be transmitted to the chassis. To
create a better mounting there is a Velcro strap to make sure the
PSU is firmly installed
-
